The clean install option has been reverted to an update install. Please click Options if you wish to change this option.
A clean install is performed by default on “^0”
The removal cannot continue because the source file “^0” on the disk “^1” will be deleted during the removal. Please select a different target folder and try again.
The removal cannot continue because the source file “^0” on the disk “^1” will be deleted during the removal. Please choose a different target disk and try again.
The installation cannot continue because the source file “^0” on the disk “^1” will be overwritten during the installation. Please select a different installation folder and try again.
The installation cannot continue because the source file “^0” on the disk “^1” will be overwritten during the installation. Please choose a different installation disk and try again.
The file “^0” on the disk “^3” is too large to accommodate the installation. The installation cannot continue. Try removing “^0” and installing again.
Installer documents cannot be opened while the Installer is running. Please quit the Installer and open the document again.
The Installer tried to quit all other running applications, but this was canceled. Therefore, installation was canceled, leaving your disk untouched.
The Installer document “^0” requires version ^1 of the Installer application. Try opening the Installer application that is in the same folder as this Installer document.
An error occurred while removing. Removal was not able to be completed, but your original software has been restored.
The files needed for this installation could not be found on your server volume “^0”. Please contact your network administrator about this problem.
The Installer cannot be opened from an MFS disk. Click Quit, then open a copy of the Installer from a disk that supports the hierarchical file system.
Problems were encountered deleting old files. Please quit the Installer, restart your Macintosh and try running the Installer again.
Installer documents cannot be printed. Quit the Installer and open the document to do an installation.
This copy of the Installer seems to be damaged. Make sure you are using the original Installer disks.
Special thanx to “Pink Floyd” who helped a lunatic get through those late nights.
^0 cannot run on your version of Macintosh Software. Please restart your Macintosh using your original set of distribution disks. Click Quit to leave the Installer.
The Installer found an alias named “^0” but could not find the original Installer document to which this alias points. Make sure you are using the original Installer disks.
Removal was successful. You must now restart your Macintosh.
Please wait while the Installer gets ready to continue…
The Installer needs to modify the file named “^0” on the disk “^3” but that file is locked. Please unlock the file and try again.
The Installer needs to create a folder named “^0” on the disk “^3” but a file with this name already exists.
Please rename this file or move it to another folder.
The Installer tried to quit all other running applications, but this was canceled. Therefore, the removal was canceled, leaving your disk untouched.
That disk is unreadable.
An error occurred while trying to complete the installation.
Removal from the active startup disk “^3” cannot take place while other applications are running. Click Continue to automatically quit all other running applications. Click Cancel to leave your disk untouched.
An error occurred while trying to complete the installation. Installation was canceled, leaving your disk untouched.
There is not enough space on the active startup disk “^3” to perform this installation (^0K available).
To install on this disk you will need ^1K free.
Installation on the active startup disk “^3” cannot take place while other applications are running. Click Continue to automatically quit all other running applications. Click Cancel to leave your disk untouched.
Installation on the active startup disk “^3” cannot take place while other applications are running. Please quit all running applications and try again.
Installation on the active startup disk “^3” cannot take place while another application is running. Please quit “^0” and try again.
Installation was successful. You must now restart your Macintosh to use your new software.
Stopping now may result in an incomplete set of software. Click Resume to continue the installation or Stop if you are sure you want to stop.
To ensure safe removal from the active startup disk “^3” ^1K of free disk space is required (^0K available).
Please remove some files using the Finder and try again.
A necessary volume has unexpectedly disappeared. Please quit the Installer and try again.
The disk “^0” could not be ejected because it is being shared. Please turn off file sharing and try the installation again.
There is a problem with a disk you are installing onto. No installation can take place. Try installing onto another disk.
The Installer cannot copy the file “^0” onto the disk “^3”. Installation cannot continue. Please delete this file and try running the Installer again.
There is a problem with the source disk “^0”. No installation can take place. Make sure you are using the original Installer disks.
There is a problem with the source disk “^0”. Installation cannot continue. The partially installed software may not be usable. Make sure you are using the original Installer disks.
The Installer document “^0” is damaged. Make sure you are using the original Installer disks and try again.
This is not the correct “^0” disk. Make sure you are using the original Installer disks and try again. Click Continue if you have the correct disk to insert. Click Stop to stop any further installation.
The file “^0” on disk “^3” cannot be replaced by the Installer. No installation will take place. Please move the file to another folder and try again.
“^0” has the correct name but is not the correct disk. Click Continue, then try inserting a different disk with this name; or click Stop to stop any further installation.
No installation was necessary.
The Installer did not find any Installer documents and cannot run without one. Please open the Installer document you wish to use.
Installation was stopped before it was completed. The partially installed software may not be usable.
The file “^0” already on “^3” is newer than what you are about to install. Click Newer to keep the newer file, Older to replace that file, or Cancel to stop the installation.
The Installer found ^0 Installer documents on the disk “^1”. Please open the specific document you wish to use.
Cannot overwrite a protected resource in the file “^0” on the disk “^3”. Error detected before installation began.
System Software is required for this installation but is not present on “^3”. Click OK, then install System Software before or as part of this installation.
A file is missing from “^3” but is required for this installation. Please check your manual to see what files are required and how to get these files.
The file “^0” is missing on “^3” but is required for this installation. Please check your manual to see how to get that file.
There were files missing on “^3” that are required for this installation. Please check your manual to see what is required.
There are too many desk accessories on “^3” to complete this installation. Installation would result in ^0 desk accessories; only ^1 are allowed. Remove some desk accessories, and try again.
There was nothing to remove.
“^0” is the wrong disk. To finish the installation, click Continue and insert “^1”. To stop any further installation, click Stop.
Installation was canceled, leaving your disk untouched.
The file “^0” already on “^3” is more recent than what you are about to install. Click Continue to replace “^0” with the older version. Click Cancel to leave the disk “^3” untouched.
The Installer document “^0” was originally written for version ^1 of the Installer.
Click Continue to use this Installer (version ^2), or click Quit to leave the Installer.
There is not enough space on the disk “^3” to complete the installation (^0K needed, ^1K available). Remove some items from the disk “^3” and try again. Instead, you could try installing on another disk.
A clean install cannot be performed on the disk “^0”
The Installer document “^0” is unusable for installation. An error was detected before installation began. Make sure you are using the original Installer disks.
^0 cannot run on this model of Macintosh. Please contact your authorized Apple dealer and inquire about upgrading your hardware. Click Quit to leave the Installer.
Removal was successful. If you are finished, click Quit to leave the Installer. If you wish to do additional installations or removals, click Continue.
Installation was successful. If you are finished, click Quit to leave the Installer. If you wish to do additional installations, click Continue.
The destination disk “^3” is too full. Please remove some files you no longer need, and try the installation again.
There are too many files open on your Macintosh. Please quit any other applications you are running and try again.
The disk is locked.
One of your disks is no longer available. Please quit the Installer, restart your Macintosh, and try running the Installer again.
A necessary file is locked. Installation cannot continue.
A problem occurred with the AppleTalk network. Please quit the Installer, restart your Macintosh, and try running the Installer again.
The Installer needs more memory to perform an installation. Try quitting other applications and running the Installer again. You could also try removing some system extensions and restarting to make more memory available.
An AppleShare volume has unexpectedly disappeared. The installation cannot continue.
A disk error has occurred and installation cannot continue. Your disk may be damaged.
You do not have the necessary privileges to access all of the files needed on the server. Contact your network administrator.
A needed file is already in use or was left open.
There has been a problem with the file server. Perhaps you do not have the necessary privileges. Check with your network administrator.
